Detailed Features
Professional Series
10" High Wall Hood with Standard Interior-Power Ventilator
Appearance and Design
Allow replacement of most older, low-performance hoods with minimal cabinet alteration
Recommended for use with 24" wide non-griddle/grill ranges, 30" wide ranges, 36" wide non-griddle/grill ranges, 30" wide/36" wide non-griddle/grill rangetops, and 30" wide/36" wide cooktops; for larger equipment, use 18" high hood
Heavy-duty, commercial-type size, construction, design, and styling
Virtually seamless design with no visible screws
All hoods have a heat sensor which turns the ventilator on full power when cooking temperatures reach uncomfortable levels
460 CFM interior-power ventilator comes standard with product
Variable speed controls for custom venting separate on/off switch allows consumer to leave ventilator at favorite/most-used setting
Halogen lights for better visibility and efficiency
Dimmer on lights allows custom lighting separate on/off switch allows consumer to leave dimmer at favorite position
Easy Cleanup
Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercial-type products
Dishwasher-safe filters are easily removed for quick cleaning
Design of low profile filter system means less interior hood space to be cleaned
Interior of rangehood canopy has stainless steel liner for increased rigidity, seamless appearance, and easy cleaning
Optional Accessories
Wall and Island Hood Duct Covers
Wall hood duct covers in two widths
24" (DCW24), 30" (DCW30) and 36" (DCW36)
12" depth, 12" height
Available in finishes to match rangehoods
Wall Hood Backsplashes
Protect wall space below hood
Create a continuous finish between cooking surface and hood
Low maintenance, easy to clean
24" (BKS24), 30" (BKS30) and 36" (BKS36)
All models are 30" high
Available in stainless steel (SS) only
Wall Hood Warming Shelf Panels
Hold cookware and condiments
Fold up/down, heavy-duty warming shelves (non-removable) factory installed on stainless steel (SS) backsplash
15 7/8" wide by 10 1/8" deep
12" depth, 12" height
24" (WGP24), 30" (WGP30) and 36" (WGP36) widths
30" wide model has one shelf
36" wide model has two shelves
Available in stainless steel (SS) only
Accessory Rail
Decorative yet functional trim must be factory installed
Chrome or brass finish
Available for front of wall hoods (CR or BR)
Exclusive finishes
Available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Stone Gray (SG), Graphite Gray (GG), Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and Eggplant (EP)
Warranty Highlights
One-year full covers complete product
Five-year limited all ventilator motors
Ninety-day limited - cosmetic parts such as glass, painted items, and decorative items
Model numbers
VWH2410 24" width
VWH3010 30 width
VWH3610 36 width
Appearance and Design
Allow replacement of most older, low-performance hoods with minimal cabinet alteration
Recommended for use with 24" wide non-griddle/grill ranges, 30" wide ranges, 36" wide non-griddle/grill ranges, 30" wide/36" wide non-griddle/grill rangetops, and 30" wide/36" wide cooktops; for larger equipment, use 18" high hood
Heavy-duty, commercial-type size, construction, design, and styling
Virtually seamless design with no visible screws
All hoods have a heat sensor which turns the ventilator on full power when cooking temperatures reach uncomfortable levels
460 CFM interior-power ventilator comes standard with product
Variable speed controls for custom venting separate on/off switch allows consumer to leave ventilator at favorite/most-used setting
Halogen lights for better visibility and efficiency
Dimmer on lights allows custom lighting separate on/off switch allows consumer to leave dimmer at favorite position
Easy Cleanup
Commercial-type baffle filter system efficiently removes grease and heated vapors from the air; especially designed for use with commercial-type products
Dishwasher-safe filters are easily removed for quick cleaning
Design of low profile filter system means less interior hood space to be cleaned
Interior of rangehood canopy has stainless steel liner for increased rigidity, seamless appearance, and easy cleaning
Optional Accessories
Wall and Island Hood Duct Covers
Wall hood duct covers in two widths
24" (DCW24), 30" (DCW30) and 36" (DCW36)
12" depth, 12" height
Available in finishes to match rangehoods
Wall Hood Backsplashes
Protect wall space below hood
Create a continuous finish between cooking surface and hood
Low maintenance, easy to clean
24" (BKS24), 30" (BKS30) and 36" (BKS36)
All models are 30" high
Available in stainless steel (SS) only
Wall Hood Warming Shelf Panels
Hold cookware and condiments
Fold up/down, heavy-duty warming shelves (non-removable) factory installed on stainless steel (SS) backsplash
15 7/8" wide by 10 1/8" deep
12" depth, 12" height
24" (WGP24), 30" (WGP30) and 36" (WGP36) widths
30" wide model has one shelf
36" wide model has two shelves
Available in stainless steel (SS) only
Accessory Rail
Decorative yet functional trim must be factory installed
Chrome or brass finish
Available for front of wall hoods (CR or BR)
Exclusive finishes
Available in Stainless Steel (SS), Black (BK), White (WH), Almond (AL), Biscuit (BT), Stone Gray (SG), Graphite Gray (GG), Burgundy (BU), Lemonade (LE), Mint Julep (MJ), Forest Green (FG), Viking Blue (VB), Cobalt Blue (CB), and Eggplant (EP)
Warranty Highlights
One-year full covers complete product
Five-year limited all ventilator motors
Ninety-day limited - cosmetic parts such as glass, painted items, and decorative items
Model numbers
VWH2410 24" width
VWH3010 30 width
VWH3610 36 width
